Max VertiPox Resin Systems are two-part, 100% solids epoxies uniquely formulated for Vertical piping and in-building applications that offer superior mechanical properties, chemical resistance and adhesion to pipe materials – even under very humid and wet conditions. As a part of the MaxLiner® lining systems, these resins are specially designed for ambient cure and formulated with excellent wet-out capability for quick and consistent sewer service repairs. Max VertiPox resins have ultra low-odor, zero VOCs and are Styrene-free. TECHNICAL DATA: Max VertiPox Resin Systems are a 3-to-1 ratio epoxy system designed to meet all specifications for full structural CIPP (Cured-In-Place Pipe) liner conforming to ASTM F1216. Using Max VertiPox Base Resin in conjunction with Max VertiPox Hardeners will achieve a fully cross-linked system to form a high quality, long-term solution. Mixed resin pot life varies with temperature and total mass of material mixed. The data provided below is for reference only. For more detailed product information, contact MaxLiner prior to use.
COMPONENTS:
Max VertiPox Resin Base (Part A) is uniquely formulated 100% solids unfilled epoxy resin. Max VertiPox Hardeners (Part B) are
modified Amine curing agents.
SYSTEM:
3 parts of resin (Part A) and 1 part of hardener (Part B) by weight are mixed thoroughly for a minimum of 3 minutes at
approximately 200 rpm. Take precautions not to incorporate air while mixing. The mixed resin is then used to fully saturate (wet
out) MaxLiner tubes specially designed for MaxLiner Lining Systems. Follow MaxLiner recommendations for equipment and
procedures for liner wet-out and installation.
FINAL PRODUCT:
The combined resin and liner system is cured after insertion into the host pipe to form a tough, strong renovated pipe. It is
resistant to gravity municipal sewage, acids and alkalis commonly found in an impermeable drains, sewers and commercial
wastewater.
SHELF LIFE AND STORAGE:
It is recommended that the resin is pre-mixed before decanting from a tote, and also in the bucket before use. Resins are stable for
one year in well-sealed containers in a sheltered area between 65 – 80°F. Max VertiPox Resins are formulated for resistance to
crystallization. However, if in the event of crystallization, contact MaxLiner immediately prior to use.
SAFETY: Always use Personal Protective Equipment (PPE) when using this product. Do not ingest. Always read the container
label warning and Safety Data Sheets (SDS) prior to use. If you do not understand or cannot adhere to the guidelines and
procedures for handling and use of these products in strict accordance with the SDS, do not use these products. SDS can be
downloaded from the MaxLiner Mobile App or website.
DISPOSAL: Disposal must conform to local and state regulations.
*It is important to note that the Max VertiPox Resin System is specifically designed for CIPP applications and has not been modified from
another industry resin in attempt to fit the complex environmental, design and performance needs required in underground rehabilitation
industry.
Call technical support with additional questions at 253-368-5614
Disclaimer: The information contained herein is offered without charge for use by technically qualified personnel at their discretion and risk. All
statements, technical information and recommendations contained herein are based on test and data which we believe to be reliable, but the
accuracy or completeness thereof is not guaranteed and no warranty of any kind is made with respect thereto. Exact coating type and thickness
depend on the specific types of resin being used. Always read, understand, and comply with hazard warnings described in the products’ Safety
Data Sheet(s) before use.
